|
|
Ford Trucks
This category is proof that it's not just Ford cars that exemplify the meaning FordMuscle. Whether it's a rock crawling Bronco, supercharged Lightning, or anything in between, we want to see you show it off here! |
|
|
|
|
lightningforce03 |
2003 f150 svt lightning
|
 |
|
mac cold air kit, 2 inch rear drop, billet engine dressup, dj motorsports razorblade grill |
|
 |
|
1/4 Mile:13.84 MPH:101 60ft:2.0 Weight:4750 CID:330 Flywheel HP:390@4700 Torque:475@4700 |
|
|
|
|
|
My F100 has a front clip and rear end from a '76 Lincoln Continental w/460, c6, power steering and power disc brakes. |
|
 |
|
CID:460 |
|
|
|
|
f100cleveland |
1977 F150 Camper Special
|
|
|
460 out of a 71 Lincoln. D0VE heads that have lots of port work done to them. Cam is a "RV" grind, 204/214@0.050 with 0.494"/0.512" lift. Pistons are the stock, small dish ones with 10.5:1 compression. D6 spreadbore intake that has been extremely ported and the phlenum opened up like a normal dual plane. 2" open spacer adapts the spreadbore pattern to the square bore pattern and a 1" tapered 4 into 1 spacer on top of that. Carb is a 750 Holley Double Pumper with annular boosters. Truck runs 3.00:1 gears and will pull into the 6,000 rpm range in 3rd gear at 180+ m |
|
 |
|
CID:460 Flywheel HP:365+@5000 Torque:500+@3500 |
|
|
|
|
FordMan94 |
1994 Ford F150 4x4
|
|
|
its all stock besides the 31s i have one it. it has a 300 I6 |
|
 |
|
|
|
|
|
|
|
This is my "FRANKEN-truck". It's from a lot of different pieces. It is sitting on a 1984 E350 chassis with 460/C6. I made it to pull a trailer loaded with my restored 1960 CASE crawler. |
|
 |
|
CID:460 |
|
|
|
|
|
No description available. |
|
 |
|
CID:351 |
|
|
|
|
|
No description available. |
|
 |
|
|
|
|
|
|
keylesschuck |
2003 F150 XLT 4WD
|
|
|
Our 2001 4WD F150. Picked it up in 2004 with 10,000 miles. Not into stepsides but it's growing on us. |
|
 |
|
CID:333 |
|
|
|
|
flyingcomet |
1968 F350 flatbed
|
|
|
390, c6, flatbed to give my Comet piggy back rides |
|
 |
|
CID:390 |
|
|
|
|
Hottarod |
1979 F150 custom explorer
|
|
|
I saved this truck from the crusher and restored it over a couple of years with some help from friends. It has a small cam, ported 2 barrel intake, 2 barrel carb from a 429, ported 5.0 GT heads, dual exhaust. I need lower gears. It will run 50 in first.
|
|
 |
|
1/4 Mile:17.54 MPH:74 60ft:2.4 Weight:4400 CID:302 |
|
|
|
|
